Oilfield services
company

SiamMaster - GDIS 2-7 Sadko 4x4

Features

  • simplified kinematic scheme;
  • an electric-driven electronic control «SIAM-LESP-7» slickline winch is used, also there is free fall. Power supply is from one-phase industrial network 220 V, 50 hz;
  • AC frequency changer provides infinitely variable speed control of lowering slickline from 7% to nominal;
  • change in direction of slickline movements is made by changing rotating direction of a motor shaft - electronic reverse;
  • speed, running depth and pulling force is controlled by an electronic meter. The running depth control is duplicated by a mechanical meter.
  • there are 2 working areas cabined off with a watch window in the vehicle: an engineering compartment and operator control room. There is a small size door between these rooms. Slickline is run through van truck splitdoors.
  • an engineering compartment is equipped with an oil-based heater 220 V in addition to self-contained heaters 24 V (diesel fuel);
  • to light the wellhead and a slickline winch, 220 V line-operated spotlamps are installed;
  • there is an amplified telephone;
  • to improve working conditions, the following equipment is installed: an air-conditioner, a washstand with a water heater, a wardrobe, sleeping berths, a chest, an operator seat and so on (optional);
  • it is equipped with a hoisting device to change a drum (optional);

Specifications

Slickline diameter From 1.8 to 2.2 mm
Empty drum traction force Not less than 3000 N
Winding speed (according to the pulling force versus speed curve) from 300 to 4000 m/h
Drum capacity for slickline 1.8 … 2.2 mm 4000 m
Drum mounting type adjustable
Induction electric motor 2.2 kW
Transducer power output 2.2 kW
Lab power supply 220 V, 1 phase, 50 hz
Operating temperature range for engineering compartment equipment from –40 °С to +50 °С
Operating temperature range for electronic equipment of control room from –1 °С to +40 °С
Computer operating temperature range from +5 °С to +40 °С
Maximum processing equipment capacity 5 kW
Lab life cycle 10 years
Free fall yes

Documents

Contact us

If you have any question connected with SIAM Company,
leave your email address and we will contact you