Wireless automatic dynamometer SIDDOS-automat 3

It is designed for complex automatic monitoring of SRP condition.

Functions

complete diagnostic of SRP operation in automatic mode including bringing a well to stable production;
production rate evaluation in software;

automation of diagnostics monitoring processes;
operating temperature ranges from -40 °C to +50 °C;
the sensor is equipped with an audible and light indicators, telling a user when to stop or start SRP when monitoring static load and leakage;
accuracy, promptness and quality of measurements are achieved by means of an automation system, a traverse weight sensor and a stroke sensor;
single-block unit, shock-resistant body for reliable operation;
the tool is equipped with adjustable jackups that simplifies installation of a tool into intra-traverse space;
storage and analysis of results in specialized software;

Load measuring range	0-10 000 kgf
Position measuring range	0-3500 mm
Load and position control method	direct
Diameter of the polished rod	up to 39 mm
Stroke rate	0,5-10 SPM
Required intra-traverse space, min	45 mm
load resolution	10 kgf
Position resolution	5 mm
Control time during leak testing	from 15 to 480 sec
Memory capacity	up to 400 dynamometer cards
Battery operating ON-time, min	10 hours
Operating temperature range	From –40 °С to +50 °С
Dimensions	155х290х205 мм
Weight	4,3 kg
Data transfer interface	RS-232 (COM-port) or USB
Explosion proof protection / Ingress Protection Rating	1 Ex ib IIB T3 Gb X / IP67

Leaflet