
SiamMaster - GDIS 2- GD1/GD2 URAL

Features
- pulling-and-running mechanism with hydraulic power drive and electronic control;
- hydraulic equipment independent drive from additional power take-off device of a vehicle;
- the possibility of infinitely variable speed control for lowering slickline from 300 to 7200 m/h;
- the possibility to use Free fall mode (when coupling is released);
- added pull characteristic up to 30000 N (empty drum);
- metering gauge without full coverage of a measuring wheel (excluding redundant slickline strain);
- extended drum capacity up to 10000 m with a slickline of the diameter up to 0.105 in (2.67 mm);
- application of modern hydraulic drive circuit, as well as reliable import accessory equipment;
- Speed, running depth and pulling force is controlled by an electronic meter;
- Additional running depth control is duplicated by a mechanical meter;
- There are 2 working areas cabined off with a watch window in the vehicle: an engineering compartment and operator control room. There is a watch window with armored glass between these areas. slickline is run through splitdoors;
- an engineering compartment is equipped with an oil-based heater 220 V in addition to self-contained heaters 24 V (diesel fuel);
- to light the wellhead and a slickline winch, 220 V line-operated spotlamps and a pilot-lite with 24 V on-board power system are installed;
- There is an amplified telephone;
- It is equipped with a hoisting device to change a drum (optional);
Specifications
slickline diameter | From 1.8 to 2.5 mm |
empty drum traction force SIAM-LGS-1 | Not less than 30000 N(3000 kgf) |
empty drum traction force SIAM-LGS-2 | Not less than 8000 N (800 kgf) |
winding speed | From 300 to 7200 m/h |
drum capacity for slickline d 1.8 …2.67 mm | 10000 m |
Drum mounting type | adjustable |
Hydraulic drive power SIAM-LGS-1 | 30 kW |
Hydraulic drive power SIAM-LGS-2 | 10 kW |
Lab power supply | 220 V, 2 phases, 50 hz |
Operating temperature range for engineering winch unit equipment | From –40 °C to +50 °С |
Operating temperature range for electronic equipment of control room | from –1 °С to +40 °С |
additional processing equipment capacity, max | 3.5 kW |
Lab life cycle | 10 years |
Documents
Leaflet